Enable Ingress Controller in cluster



  • Kubernetes cluster version v1.19.0 or higher.
  • FSM version >= v1.1.0.
  • FSM CLI to install FSM and enable FSM Ingress.

There are two options to install FSM Ingress Controller. One is installing it along with FSM during FSM installation. It won’t be enabled by default so we need to enable it explicitly:

fsm install \

Another is installing it separately if you already have FSM mesh installed.

Using the fsm command line tool to enable FSM Ingress Controller.

fsm ingress enable

Check the resource.

kubectl get pod,svc -n fsm-system -l app=fsm-ingress                                                                            
NAME                               READY   STATUS    RESTARTS   AGE
pod/fsm-ingress-574465b678-xj8l6   1/1     Running   0          14h

NAME                  TYPE           CLUSTER-IP      EXTERNAL-IP   PORT(S)        AGE
service/fsm-ingress   LoadBalancer      80:30508/TCP   14h

Once all done, we can start to play with FSM Ingress Controller.


Was this page helpful?